Two Switch

This apparatus takes input from one radio channel and switches one of two devices based on the stick position.  Low stick triggers Device 1, while high stick turns on Device 2.  This version requires the operator to hold the stick in the low or high position for the length of time the device is to be turned on.  The LED lights for ground testing.

This circuit and code has not been tested.  it is presented solely as an academic exercise.

The download includes the hex code and PBP file.

Note the use of the 2N7000 N Channel MOSFETs to permit high current loads. Credit to Mr. RC-CAM

[ Home ] [ Up ]                                                                                                                                               

Send mail to ironsidz@hotmail.com with questions or comments about this web site.
Copyright © 2003 
Last modified: March 18, 2004