 | Single Stage Digital Camera Control
 | Richard Ingram |
 | Wild Moose |
 | Michele Schieppati |
 | Mr. RC-CAM |
 | Camille Goudeseune |
 | CatsEyes |
 | Zagisrule! |
 | Ironsides |
|
 | Dual Stage Digital Camera Control
 | Michele Schieppati |
 | Mr. RC-Cam |
|
 | Dual Stage Variable Timing Servo Controller
 | Manfred Fuchs |
|
 | Digital Camera Tilt Platform with Camera Trigger
 | CatsEyes |
|
 | Navigation Lights
 | Michele Schieppati (very sophisticated Windows-interfaced version) |
 | Ironsides (trivial - demonstration only) |
|
 | Sequencing Gear Retracts
 | CatsEyes as an example for Ironsides |
|
 | Slow Flaps
 | Developed by Ironsides from code supplied by CatsEyes |
 | Adaptation of LandTastic
by RC-CAM |
|
 | Electronic Speed Controller
 | TugBoat |
|
 | LandTastic - Combined slow moving gear retract, strobe light and
lost airplane piezo buzzer - programmable
 | Mr. RC-CAM |
|
 | Plane Finder
|
 | Airborne Timers
|
 | Twin Power Throttle Servo/ESC Management
 | Twin Power by Ironsides used to steer twin-engine seaplanes and flying
boats on the water. |
|
 | Servo Reverser
 | Servo Reverser by Ironsides could be
used in aileron or split elevator applications. |
|
 | Glow Plug Driver
 | Glow Driver is used on glow engine
to prevent deadsticks at low throttle settings, especially with inverted
engines. |
|
 | Servo Trimmer
 | A Servo Trimmer can be used to adjust the travel of the servo arm for
throttle, aileron, flap etc throw. Ironsides has designed a series of
Servo Trimmers with different parameters |
|
 | Fail-Safe
 | An in-line PIC on the throttle servo kills the glow engine if there is
loss of signal from the transmitter. Included is a glow plug driver
for low power settings. Fail-Safe-Glow by
Ironsides |
|